Writing By Reza Haghayeghi :
Twin screw melt conditioners are used for mixing purposes and are mainly used for polymer processing.
These conditioners (extruders) can be used for liquid metal processing in which liquid metal/slurry is subjected to high shear stress.
This process results in grain refinement of structure.
In this article, in a co-rotating twin screw melt conditioner, the solidification process of a liquid along with temperature variations of the melt with regard to the complexity of the flow has been examined.
With the aid of dynamic mesh scheme, a Computational Fluid Dynamic (CFD) simulation was performed. The achieved results were in good agreement with values based on the experimental measurements.
It was concluded that shearing and pouring temperatures play important roles in solidification progression and the main reason of surviving nuclei is heat dissipation from the barrel. Also, the main factor affecting the grain size is the temperature differences between the pouring and the setting temperature.
It was observed that, the twin screw melt conditioner can decrease the temperature gradient and with the help of turbulence, providing appropriate conditions for formation of fine and equiaxed grains.
Writing By Reza Haghayeghi
Writing By Reza Haghayeghi :
Twin screw melt conditioners are used for mixing purposes and are mainly used for polymer processing.
These conditioners (extruders) can be used for liquid metal processing in which liquid metal/slurry is subjected to high shear stress.
This process results in grain refinement of structure.
In this article, in a co-rotating twin screw melt conditioner, the solidification process of a liquid along with temperature variations of the melt with regard to the complexity of the flow has been examined.
With the aid of dynamic mesh scheme, a Computational Fluid Dynamic (CFD) simulation was performed. The achieved results were in good agreement with values based on the experimental measurements.
It was concluded that shearing and pouring temperatures play important roles in solidification progression and the main reason of surviving nuclei is heat dissipation from the barrel.
Also, the main factor affecting the grain size is the temperature differences between the pouring and the setting temperature.
It was observed that, the twin screw melt conditioner can decrease the temperature gradient and with the help of turbulence, providing appropriate conditions for formation of fine and equiaxed grains.
Writing By Reza Haghayeghi
